返回顶部
位置:标准分享网>机械工程材料论文>超音速火焰喷涂WC-10Co4Cr涂层的高周疲劳损伤
超音速火焰喷涂WC-10Co4Cr涂层的高周疲劳损伤
  • 资料大小:

  • 更新时间:

    2008-12-03

  • 授权方式:

    共享学习

  • 资料格式:

    PDF

  • 软件等级:

  • 官方主页:

    http://www.ndt88.com

资料简介

采用超音速火焰喷涂方法在300M钢基体上制备了WC-10Co4Cr涂层,对其和在300M钢上的电镀铬层进行了高周疲劳试验,采用SEM及EDS等对经高周疲劳后的涂层开裂和剥落机理进行了研究.结果表明:经过2/3疲劳寿命周次的高周疲劳后,WC-10Co4Cr涂层出现多条平行周向裂纹,裂纹与载荷方向垂直,为正断;试样疲劳断裂后,WC-10Co4Cr涂层断口附近有剥落,随载荷的增加,剥落面积增大;而电镀铬层在试样断裂后表面裂纹也不十分明显,高载荷下断裂后有少许镀层剥落.

所属栏目

试验研究

收稿日期

2008/12/32009/7/16

作者单位

邓春明:广州有色金属研究院, 广州 510651
刘敏:广州有色金属研究院, 广州 510651
周克崧:广州有色金属研究院, 广州 510651
宋进兵:广州有色金属研究院, 广州 510651
肖伟昊:广州有色金属研究院, 广州 510651

备注

邓春明(1976-),男,江西黎川人,博士.

引用该论文:

DENG Chun-ming,LIU Min,ZHOU Ke-song,SONG Jin-bing,XIAO Wei-hao.High Cycle Fatigue Damage of HVAF WC-10Co4Cr Coating[J].Materials for mechancial engineering,2010,34(1):1~4
邓春明,刘敏,周克崧,宋进兵,肖伟昊.超音速火焰喷涂WC-10Co4Cr涂层的高周疲劳损伤[J].机械工程材料,2010,34(1):1~4


参考文献

【1】

戴达煌,周克崧.现代材料表面技术科学[M].北京:冶金工业出版社,2004:126-127.

【2】

LEGG K O.Overview of chromium and cadmium alternative technologies[C]//Surface Modification Technologies XV,Proceedings of the International Conference on Surface Modification Technologies,15th,ASM International.Materials Park:Ohio and IOM Communications Ltd.,2002:235-244.

【3】

BODGER B E,EMERY W A,SOMMERVILLE D A.An example of the decision making process for the evaluation of tungsten carbide thermal spray process as replacements for electrodeposited chrome plating[C]//Proceedings of the American Electroplaters and Surface Finishers Society (AESF) 33rd Aerospace/ Airline Plating and Metal Finishing Forum.Burlingame,California:The American Electroplaters and Surface Finishers Society,1997:207-216.

【4】

SARTWELL B D,BRETZ P E.HVOF thermal spray coatings replace hard chrome[J].Advanced Materials Processes,1999,156(2):25-28.

【5】

邓春明,周克崧,刘敏,等.近疲劳强度下WC/Co涂层对300M 低合金钢疲劳性能的影响[J].机械工程材料,2006,30(9):44-47.

【6】

VERSTAK A,BARANOVSKI V,AC-HVAF sprayed tungsten carbide properties and applications [C]//Proceedings of the 2006 International Thermal Spray Conference.Washington:Seatle,2006.

【7】

SAHRAOUI T,GUESSASMA S,FENINECHE N E,et al.Friction and wear behaviour prediction of HVOF coatings and electroplated hard chromium using neural computation[J].Materials Letters,2004,58(5):654-660.

【8】

李长久,王豫跃,大森明.粉末结构对超音速火焰喷涂WC系金属陶瓷涂层结和强度的影响[J].中国表面工程,2000,4(2):1-4.

【9】

SARTWELL B,LEGG K O.Hard chrome alternatives team tri-service validation of HVOF thermal spray as a chrome replacement for aircraft[EB/OL].[08-07-23],http://www.rowantechnology.com/Documents/Chrome%20Replacement/RUST%202001%20HCAT.pdf#search=%22HVOF%20%20COATING%20integrity%20%20hcat%22.2001.

【10】

QIAO Yun-fei.Mechanical and tribological properties of thermally sprayed WC-Co coatings[D].New Jersey:Steven Institute of Technology,2001.

标准分享网无损检测论文频道,免费下载【超音速火焰喷涂WC-10Co4Cr涂层的高周疲劳损伤】,仅供学习使用,不得商用,如需商用请购买正版超音速火焰喷涂WC-10Co4Cr涂层的高周疲劳损伤。谢谢合作

【关键词】 WC-10Co4Cr涂层 电镀铬 高周疲劳  邓春明 刘敏 周克崧 宋进兵 肖伟昊

猜下面文档对你有所帮助
机械工程材料论文排行