综述了超声波辅助钎焊金属材料、陶瓷材料及铝基复合材料的研究进展, 介绍了超声辅助钎焊工艺对钎焊接头性能及显微组织的影响, 重点分析了钎焊过程中超声波对基体表面状态的作用、超声波辅助钎焊连接机理, 对超声波辅助钎焊技术今后的发展进行了展望。
所属栏目
综述国家自然科学基金资助项目(10009012200802)
收稿日期
2011/12/82012/8/18
作者单位
李国栋:北京工业大学材料科学与工程学院, 北京 100124
栗卓新:北京工业大学材料科学与工程学院, 北京 100124
张天理:北京工业大学材料科学与工程学院, 北京 100124
马司鸣:北京工业大学材料科学与工程学院, 北京 100124
备注
李国栋(1974-), 男, 山西太谷人, 博士研究生。
引用该论文:
LI Guo-dong,LI Zhuo-xin,ZHANG Tian-li,MA Si-ming.Development of Ultrasonic Assisted Soldering Technique[J].Materials for mechancial engineering,2013,37(1):1～4
李国栋,栗卓新,张天理,马司鸣.超声波辅助钎焊技术的研究进展[J].机械工程材料,2013,37(1):1～4
被引情况:
【1】
林坤艺,皮钧,吴聪苗, "分阶振幅对薄金属超声焊接接头强度的影响",机械工程材料
39, 22-25(2015)
参考文献
【1】
VIANCO P T, HOSKING F M, REJENT J A. Ultrasonic soldering for structural and electronic applications[J]. Welding Journal, 1996, 75(11): 343-355.
【2】
TAKAAKI O, TOSHIKI T. New methods of ultrasonic welding of metal and plastic materials[J]. Ultrasonic, 1996, 34: 177-185.
【3】
吴敏生, 何龙标, 李路明, 等.电弧超声的激发及其特性研究[J].清华大学学报, 1999, 36(6): 110-112.
【4】
马立群, 舒光冀, 陈锋.金属熔体在超声中凝固的研究[J].材料科学与工程, 1995, 13(4): 2-7.
【5】
CUI Y, XU C L, HAN Q. Effect of ultrasonic vibration on unmixed zone formation[J]. Scripta Materialia, 2006, 55(11): 975-978.
【6】
ISHIKAWA, KAZUNORI, KAWASE, et al. Erosion phenomena in ultrasonic soldering of aluminum[J]. Journal of Light Metal Welding and Construction, 1980, 18(8): 341-348.
【7】
闫久春, 孙小磊.超声波振动辅助钎焊技术[J].焊接, 2009(3): 6-13.
【8】
XU Z W, YAN J C, ZHANG B Y, et al. Behaviors of oxide film at the ultrasonic aided interaction interface of Zn-Al alloy and Al2O3p/6061 Al composites in air[J]. Materials Science and Engineering, 2006, 415: 80-86.
【9】
YAN J C, XU Z W, SHI L, et al. Ultrasonic assisted fabrication of particle reinforced bonds joining aluminum metal matrix composites [J]. Materials and Design, 2010, 32: 343-347.
【10】
YAN J C, ZHAO W W, XU H B, et al. Ultrasonic brazing of aluminum alloy and aluminum matrix composite: U S, USP3875C[P].2007-09-10.
【11】
LI M Y, WANG Q C, BANG H S, et al. Development of a flux-less soldering method by ultrasonic modulated laser[J].Journal of Material Processing Technology, 2005, 168: 303-307.
【12】
SCHUSTER J, CHILKO R. Ultrasonic soldering of aluminum heat exchanges[J].Welding Journal, 1975, 54(10): 711-723.
【13】
FARIDI H R, DEVLETIAN J H, LE H P. A new look at flux-free ultrasonic soldering[J].Welding Journal, 2000, 79(9): 41-45.
【14】
BARIL G, PEBERE N. The corrosion of pure magnesium in aerated and sodium solution[J].Corrosion Science, 2001, 43: 471-484.
【15】
UDHAYAN R, DEVENDRA P B. On the corrosion behavior of magnesium and its alloy using electro-chemical techniques[J].Journal of Power Sources, 1996, 63: 103-107.
【16】
高晨, 李红, 栗卓新.AZ31B镁合金超声振动钎焊接头微观结构和力学性能[J].焊接学报, 2009, 30(2): 129-132.
【17】
LIU L M, WU Z H. Microstructure and interfacial reactions of soldering magnesium alloy AZ31B[J].Materials Characterization, 2010, 61: 13-18.
【18】
NAKA M, HAFEZ M. Applying of ultrasonic waves on brazing of alumina to copper using Zn-Al filler alloy[J].Journal of Materials Science, 2003, 38: 3491-3494.
【19】
EK-SAYED M H, HAFEZ K M, NAKA M, et al. Ultrasonic brazing of aluminum to stainless steel[J].Trans JWRI, 2003, 32(1): 143-146.
【20】
EK-SAYED M H. Ultrasonic brazing of copper to aluminum[J].Canadian Metallurgical Quarterly, 2004, 43(1): 117-124.
【21】
KHALID M H, NAKA M. Mechanism of ultrasonic irradiation on joining of alumina/copper[J].Trans JWRI, 2002, 31(2): 177-180.
【22】
KHALID M H, NAKA M. Statistical analysis of alumina/metal brazed joints under applying of ultrasonic waves[J].Trans JWRI, 2003, 32(2): 309-312.
【23】
NAKA M, HAFEZ K M. Applying of ultrasonic waves on brazing of alumina to copper using Zn-Al filler alloy[J].Journal of Materials Science, 2003, 38: 3491-3494.
【24】
TAMURA S, TSUNEKEWA Y, OKUMIYA M, et al. Ultrasonic cavitation treatment for soldering on Zr-based bulk metallic glass [J]. Journal of Materials Processing Technology, 2008, 206: 322-327.
【25】
任家烈, 吴爱萍. 先进材料的连接[M].北京: 机械工业出版社, 2000: 186-267.
【26】
KHALID M H, NAKA M. Mechanism of ultrasonic irradiation on joining of alumina/copper[J].Trans JWRI, 2002, 31(2): 177-180.
【27】
SUDHAKAR K. Joining of aluminum-based particulated-reinforced metal-matrix composites[D].Columbus, Ohio: The Ohio State University, 1990.
【28】
张洋.超声波作用下SiC与Zn-Al连接界面行为及焊缝强化机理[D].哈尔滨: 哈尔滨工业大学, 2009.
【29】
ZHANG Y, YAN J C, CHEN X G, et al. Ultrasonic dissolution of brazing of 55%SiCp/A356 composites[J].Transactions of Nonferrous of Metals Society of China, 2010, 20(5): 746-750.
【30】
XU Z W, YAN J C, WU G H, et al. Interface structure and strength of ultrasonic vibration liquid phase bonded joints of Al2O3/6061Al composites[J].Scripta Mater, 2005, 53(7): 835-839.
【31】
XU Z W, YAN J C, CHEN W, et al. Effect of ultrasonic vibration on the grain refinement and SiC particle distribution in Zn-based composite filler metal[J].Materials Letters. 2008, 62: 2615-2618.
