采用球压痕试验和常规拉伸试验两种方法对16MnR钢的拉伸性能进行了测试并进行了对比。结果表明:球压痕法能够准确、基本无损地测出试验钢的拉伸性能,其结果与常规拉伸试验结果比较符合,屈服强度和抗拉强度的最大误差分别为6.8%和1.9%。
所属栏目
材料性能及其应用
收稿日期
2013/9/62014/7/13
作者单位
伍声宝:华东理工大学机械与动力工程学院,承压系统安全科学教育部重点试验室, 上海 200237
徐彤:中国特种设备检测研究院, 北京 100013
喻灿:华东理工大学机械与动力工程学院,承压系统安全科学教育部重点试验室, 上海 200237
陆彦琰:华东理工大学机械与动力工程学院,承压系统安全科学教育部重点试验室, 上海 200237
关凯书:华东理工大学机械与动力工程学院,承压系统安全科学教育部重点试验室, 上海 200237
备注
伍声宝(1987-),男,海南文昌人,博士研究生。
引用该论文:
WU Sheng-bao,XU Tong,YU Can,LU Yan-yan,GUAN Kai-shu.Measuring Tensile Properties of 16MnR Steel by Ball Indentation Technology[J].Materials for mechancial engineering,2015,39(1):82～85
伍声宝,徐彤,喻灿,陆彦琰,关凯书.采用球压痕法测16MnR钢的拉伸性能[J].机械工程材料,2015,39(1):82～85
被引情况:
【1】
魏中坤,伍声宝,关凯书, "球压痕法评价16MnR钢的断裂韧性",机械工程材料
40, 32-34(2016)
【2】
关凯书,邹 镔,伍声宝, "连续球压痕法评价钢的塑性",机械工程材料
40, 18-21(2016)
参考文献
【1】
TABOR D. The hardness of metals［M］.Oxford:Oxford University Press,1951.
【2】
HAGGAG F M. In-situ measurements of mechanical properties using novel automated ball indentation system［C］// Small Specimen Test Techniques Applied to Nuclear Reactor Vessel Thermal Annealing and Plant Life Extension. Philadelphia:American Society for Testing and Materials,1993:27-44.
【3】
HAGGAG F M,WANG J A,THEISS T J. Using portable/in-situ stress-strain microprobe system to measure mechanical properties of steel bridges during service［C］// Nondestructive Evaluation Techniques for Aging Infrastructure and Manufacturing. Scottsdale:International Society for Optics and Photonics,1996:65-75.
【4】
MIRAGLIA P Q,MATHEW M D,MURTY K L,et al. Nondestructive evaluation of mechanical properties of A533B steel qeld using automated ball indentation testing［C］//ASM Proceedings of the International Conference.［S.l］:［s.n.］,1998:835-841.
【5】
GHOSH S,SAHAY S K,DAS G. Ball indentation technique-an important and useful method for studying the flow properties of materials［J］.Transactions of the Indian Institute of Metals,2004,57(1):51-60.
【6】
JANG J I,CHOI Y,LEE J S,et al. Application of instrumented indentation technique for enhanced fitness-for-service assessment of pipeline crack［J］.International Journal of Fracture,2005,131(1):15-34.
【7】
伍声宝,关凯书.球压痕法评价材料拉伸性能的有限元分析［J］.压力容器,2012,29(9):33-38.
【8】
OLIVER W C,PHARR G M. Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments［J］.Journal of Materials Research,1992,7(6):1564-1583.
【9】
DIETER G E. Mechanical Metallurgy［M］.New York:McGraw-Hill Book Company,1986:289-292.
