返回顶部
位置:标准分享网>机械工程材料论文>铜铋合金与ZrO2陶瓷扩散焊接头的组织与剪切强度
铜铋合金与ZrO2陶瓷扩散焊接头的组织与剪切强度
  • 资料大小:

  • 更新时间:

    2011-03-12

  • 授权方式:

    共享学习

  • 资料格式:

    PDF

  • 软件等级:

  • 官方主页:

    http://www.ndt88.com

资料简介

在1.3 Pa的真空环境下, 用扩散焊接法进行了Cu-x%Bi合金(x=0, 0.5, 1.0, 2.0)与ZrO2陶瓷的连接, 并采用扫描电镜、电子探针及剪切试验机等研究了铜铋合金与ZrO2陶瓷扩散焊接头的组织及剪切强度。结果表明: 在焊接压力作用下挤入接合界面的铋, 在焊接后部分残留在界面上, 对焊接热应力有缓释作用, 可提高接头的剪切强度; 当接头的使用温度高于373 K后, 由于界面上铋的软化, 接头的剪切强度急剧下降, 难以在高温环境中使用。

所属栏目

试验研究

收稿日期

2011/3/122011/12/7

作者单位

潘厚宏:西南交通大学材料科学与工程学院, 成都 610031
刘拥军:西南交通大学材料科学与工程学院, 成都 610031
张大向:西南交通大学材料科学与工程学院, 成都 610031
伊藤勲:群马大学机械工程系,桐生 376-8515

备注

潘厚宏(1964-), 男, 重庆人, 副教授, 博士。

引用该论文:

PAN Hou-hong,LIU Yong-jun,ZHANG Da-xiang,ITOH Isao.Microstructure and Shear Strength of Diffusion Bonding Joint between Cu-Bi Alloy and ZrO2 Ceramic[J].Materials for mechancial engineering,2012,36(3):11~13
潘厚宏,刘拥军,张大向,伊藤勲.铜铋合金与ZrO2陶瓷扩散焊接头的组织与剪切强度[J].机械工程材料,2012,36(3):11~13


参考文献

【1】

ITOH I, OTOGURA Y, HASEGAWA K,et al. Diffusion welding of alumina and Al-Sn alloy[J]. Journal of Japan Institute of Light Metals,1991,41(4):245-250.

【2】

ITOH I, OTOGURA Y, DOI T,et al. Diffusion welding of zirconia and Al-Sn alloy in the atmosphere[J]. Journal of Japan Institute of Light Metals,1993,43(3):134-138.

【3】

ITOH I, OTOGURA Y, DOI T,et al. Diffusion welding of Si3N4 and Al-Sn alloy in the atmosphere[J]. Journal of Japan Institute of Light Metals,1993,43(5):258-262.

【4】

PAN H H, ITOH I, MATSUBAR M. Mechanical properties of diffusion bonding joint of SiC and Al-Sn alloys at elevated temperatures[J]. Materials Transactions,2001,42(12):2543-2547.

【5】

ITOH I, OTOGURA Y, KOUZUMA K,et al. Diffusion welding of Al-Sn alloy and steel in the atmosphere[J]. Journal of Japan Institute of Light Metals,1993,43(8):433-437.

【6】

YAMADA H, ITOH I, NAKATA H,et al. Diffusion bonding of Al-Sn alloys and Mo in the atmosphere[J]. Journal of Japan Institute of Light Metals,1997,47(5):279-284.

【7】

ITOH I, OTOGURA Y, HASEGAWA K. Diffusion welding of Al-Sn alloy and copper[J]. Journal of Japan Institute of Light Metals,1991,41(9):590-595.

【8】

ITOH I, OTOGURA Y, KOUZUMA K,et al. Diffusion bonding of Al-Sn alloy to Cu or 7-3 brass in the atmosphere[J]. Journal of the Japan Copper and Brass Research Association,1994,33(1):82-87.

【9】

ITOH I, YAMADA H, OTOGURA Y. Diffusion bonding of Cu-Sn alloy and Al-Sn alloys in the atmosphere[J]. Journal of the Japan Copper and Brass Research Association,1996,35(1):126-131.

【10】

戴永年. 二元合金相图集[M]. 北京:科学出版社,2009.

【11】

HONIG R E. Vapor pressure data for the solid and liquid elements[J]. Rca Review,1962,11:567-579.

标准分享网无损检测论文频道,免费下载【铜铋合金与ZrO2陶瓷扩散焊接头的组织与剪切强度】,仅供学习使用,不得商用,如需商用请购买正版铜铋合金与ZrO2陶瓷扩散焊接头的组织与剪切强度。谢谢合作

【关键词】 扩散焊 铜铋合金 ZrO2陶瓷 剪切强度  潘厚宏 刘拥军 张大向 伊藤勲

猜下面文档对你有所帮助
机械工程材料论文排行