对氮化硅轴承球滚动接触疲劳的研究进行了综述, 介绍了影响氮化硅轴承球滚动接触疲劳性能的主要因素, 包括气孔、表面微裂纹、表面强度、残余应力、表面粗糙度和润滑条件等, 以及介绍了疲劳剥落失效产生的机制, 分析了目前研究所存在的问题, 并对今后的发展方向进行了展望。

所属栏目

综述

收稿日期

2013/8/132014/4/8

作者单位

祁海:上海材料研究所 上海市工程材料应用评价重点实验室, 上海 200437
张培志:上海材料研究所 上海市工程材料应用评价重点实验室, 上海 200437
郭方全:上海材料研究所 上海市工程材料应用评价重点实验室, 上海 200437

备注

祁海(1989-), 男, 江苏南通人, 硕士研究生。

引用该论文:

QI Hai,ZHANG Pei-zhi,GUO Fang-quan.Research Status of Rolling Contact Fatigue Performance of Silicon Nitride Bearing Balls[J].Materials for mechancial engineering,2014,38(6):1～5
祁海,张培志,郭方全.氮化硅轴承球滚动接触疲劳性能的研究现状[J].机械工程材料,2014,38(6):1～5

参考文献

【1】

HADFIELD M, STOLARSKI T A. Observations of lubricated rolling contact fatigue on silicon nitride rods［J］.Ceramics International,1995,21:13-19.

【2】

HADFIELD M. Failure of silicon nitride rolling elements with ring crack defects［J］.Ceramics International,1998,24:379-386.

【3】

KANG J, HADFIELD M. The influence of heterogeneous porosity on silicon nitride/steel wear in lubricated rolling contact［J］.Ceramics International,2000,26:315-324.

【4】

THOMA K, ROHR L, REHMANN H, et al. Materials failure mechanisms of hybrid ball bearings with silicon nitride balls［J］.Tribology International,2004,37:463-471.

【5】

O′BRIEN M J, PRESSER N, ROBINSON E Y. Failure analysis of three Si3N4 balls used in hybrid bearings［J］.Engineering Failure Analysis,2003,10:453-473.

【6】

WANG Y, HADFIELD M. The influence of ring crack location on the rolling contact fatigue failure of lubricated silicon nitride: experimental studies［J］.Wear,2000,243:157-166.

【7】

WERESZCZAK A A, KIRKLAND T P, JADAAN O M. Strength measure of ceramic spheres using a diametrally compressed “C-sphere” specimen［J］.Journal of the American Ceramic Society,2007,90:1843-1849.

【8】

WANG W, HADFIELD M, WERESZCZAK A A. Surface strength of silicon nitride in relation to rolling contact performance［J］.Ceramics International,2009,35:3339-3346.

【9】

WANG W, HADFIELD M, WERESZCZAK A A. Surface strength of silicon nitride in relation to rolling contact performance measured on ball-on-rod and modified four-ball tests［J］.Tribology International,2010,43:423-432.

【10】

HADFIELD M, TOBE S. Residual stress measurements of hot isostatically pressed silicon nitride rolling elements［J］.Ceramics International,1998,24:387-392.

【11】

KANG J, HADFIELD M, TOBE S. Residual stress field of HIPed silicon nitride rolling elements［J］.Ceramics International,2002,28:645-650.

【12】

KANG J, HADFIELD M. The effects of lapping load in finishing advanced ceramic balls on a novel eccentric lapping machine［J］.Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture,2005,219:505-513.

【13】

KHAN Z A, HADFIELD M, TOBE S, et al. Ceramic rolling elements with ring crack defects-a residual stress approach［J］.Materials Science and Engineering: A,2005,404:221-226.

【14】

KHAN Z A, HADFIELD M. Manufacturing induced residual stress influence on the rolling contact fatigue life performance of lubricated silicon nitride bearing materials［J］.Materials and Design,2007,28:2688-2693.

【15】

KANG J, HADFIELD M, CUNDILL R T. Rolling contact fatigue performance of HIPed Si3N4 with different surface roughness［J］.Ceramics International,2001,27:781-794.

【16】

KANG J, HADFIELD M, AHMED R. The effects of material combination and surface roughness in lubricated silicon nitride/steel rolling contact fatigue［J］.Materials and Design,2003,24:1-13.

【17】

KAHLMAN L, HUTCHINGS I M. Effect of particulate contamination in grease-lubricated hybrid rolling bearings［J］.Tribology Transactions,1999,42:842-850.

【18】

金永福, 王黎钦, 古乐, 等. 污染颗粒对Si3N4陶瓷球疲劳影响的研究［J］.哈尔滨工业大学学报,2006,36(2):223-225.

【19】

KARASZEWSKI W. The influence of oil additives on spread cracks in silicon nitride［J］.Tribology International,2008,41:889-895.

【20】

宋宝玉, 张锋, 刘艳玲. 纳米金刚石对陶瓷球疲劳寿命影响的研究［J］.哈尔滨工业大学学报,2006(增):249-252.

【21】

KHAN Z A, HADFIELD M, WANG Y. Pressurised chamber design for conducting rolling contact experiments with liquid refrigerant lubrication［J］.Materials and Design,2005,26:680-689.

【22】

魏珊.现代陶瓷轴承的应用［J］.国外轴承技术,1999(1):37-40.

【23】

周井玲, 吴国庆, 陈晓阳, 等. 氮化硅陶瓷球显微结构与滚动接触疲劳性能［J］.润滑与密封, 2007,32(3):139-155.

【24】

KARUNAMURTHY B, HADFIELD M, VIEILLARD C, et al. Cavitation and rolling wear in silicon nitride［J］.Ceramics International, 2010,36:1373-1381.

【25】

KOMATSU M, TONAI H, KOMORITA H. Silicon nitride wear resistant member and method of manufacturing the member: US, 6784131 B2［P］.2004-08-31.

【26】

ICHIKAWA M, TAKAMATSU T, SHINDOU N, et al. Ring crack initiation load of silicon nitride bearing balls［J］.JSME International Journal Series A,1995,38(2):226-230.

【27】

WANG Y, HADFIELD M. Rolling contact fatigue failure modes of lubricated silicon nitride in relation to ring crack defects［J］.Wear,1999,225/229:1284-1292.

【28】

WANG Y, HADFIELD M. Ring crack propagation in silicon nitride under rolling contact［J］.Wear,2001,250:282-292.

【29】

WANG Y, HADFIELD M. A study of line defect failure of ceramic rolling elements in rolling contact［J］.Wear,2002,253:975-985.

【30】

WANG Y, HADFIELD M. A mechanism for nucleating secondary fractures near a pre-existing flaw subjected to contact loading［J］.Wear,2003,254:597-605.

【31】

WANG Y, HADFIELD M. Failure modes of ceramic rolling elements with surface crack defects［J］.Wear,2004,256:208-219.

【32】

KIDA K, URAKAMI T, YAMAZAKI T, et al. Surface crack growth of silicon nitride bearings under rolling contact fatigue［J］.Fatigue Fracture Engineering Material Structure, 2004,27:657-668.

【33】

ZHAO P, HADFIELD M, WANG Y, et al. The influence of test lubricants on the rolling contact fatigue failure mechanisms of silicon nitride ceramic［J］.Wear,2004,257:1047-1057.

【34】

KIDA K, SAITO M, KITAMURA K. Flaking failure originating from a single surface crack in silicon nitride under rolling contact fatigue［J］.Fatigue Fracture Engineering Material Structure,2005,28:1087-1097.

【35】

ZHAO P, HADFIELD M, WANG Y, et al. Subsurface propagation of partial ring cracks under rolling contact Part I. Experimental studies［J］.Wear,2006,261:382-389.

【36】

HADFIELD M, STOLARSKI T A. The effect of the test machine on the failure mode in lubricated rolling contact of silicon nitride［J］.Tribology International,1995,28:377-382.

【37】

KANG J, HADFIELD M. Comparison of four-ball and five-ball rolling contact fatigue tests on lubricated Si3N4/steel contact［J］.Materials and Design,2003,24:595-604.

【38】

周井玲,吴国庆,丁锦宏, 等.轴承用球三点接触纯滚动接触疲劳寿命试验机［J］.轴承,2006(6):23-26.