返回顶部
位置:标准分享网>机械工程材料论文>铝锌二元合金镀膜盐液腐蚀表征参数的正交优化设计及耐蚀成分优选
铝锌二元合金镀膜盐液腐蚀表征参数的正交优化设计及耐蚀成分优选
  • 资料大小:

  • 更新时间:

    2011-09-14

  • 授权方式:

    共享学习

  • 资料格式:

    PDF

  • 软件等级:

  • 官方主页:

    http://www.ndt88.com

资料简介

采用离子束多靶溅射系统结合掩模技术, 制备了4×4阵列铝锌二元镀膜组合材料试样库; 利用自建的试验平台对镀膜的耐盐液腐蚀性能进行了研究, 借助正交试验研究了盐液液面高度等关键参量对耐蚀性能的影响, 获得了最优成分。结果表明: 铝的物质的量分数为83%~86%时镀膜具有较好的耐腐蚀性能。

所属栏目

试验研究

收稿日期

2011/9/142012/6/11

作者单位

霍伟亮:中国科学院上海硅酸盐研究所, 高性能陶瓷和超微结构国家重点实验室, 上海 200050中国科学院研究生院, 北京 100049
唐馥涵:中国科学院上海硅酸盐研究所, 高性能陶瓷和超微结构国家重点实验室, 上海 200050中国科学院研究生院, 北京 100049
刘庆峰:中国科学院上海硅酸盐研究所, 高性能陶瓷和超微结构国家重点实验室, 上海 200050
刘茜:中国科学院上海硅酸盐研究所, 高性能陶瓷和超微结构国家重点实验室, 上海 200050

备注

霍伟亮(1982-), 男, 广东佛山人, 硕士研究生。

引用该论文:

HUO Wei-liang,TANG Fu-han,LIU Qing-feng,LIU Qian.Optimized Orthogonal Design for Corrosion Characterization Parameters of Al-Zn Alloy Film in Salt Solution and Resistant Corrosion Composition Optimizing[J].Materials for mechancial engineering,2012,36(9):20~25
霍伟亮,唐馥涵,刘庆峰,刘茜.铝锌二元合金镀膜盐液腐蚀表征参数的正交优化设计及耐蚀成分优选[J].机械工程材料,2012,36(9):20~25


参考文献

【1】

LO K H, SHEK C H, LAI J K L. Recent developments in stainless steels [J].Materials Science and Engineering R-Reports, 2009, 65(4/6): 39-104.

【2】

CUSENZA S, SCHAAF P. Amorphous stainless steel coatings prepared by reactive magnetron-sputtering from austenitic stainless steel targets [J].Applied Physics A-Materials Science and Processing, 2009, 94(1): 139-154.

【3】

JANDELEIT B, Schaefer D J, POWERS T S, et al. Combinatorial materials science and catalysis [J].Angewandte Chemie-International Edition, 1999, 38(17): 2495-2532.

【4】

LI X H, DENG S D, Mu G N, et al. Inhibition effect of nonionic surfactant on the corrosion of cold rolled steel in hydrochloric acid [J].Corrosion Science, 2008, 50(2): 420-430.

【5】

LUO Z L, GENG B, BAO J, et al. Parallel solution combustion synthesis for combinatorial materials studies[J].Journal of Combinatorial Chemistry, 2005, 7(6): 942-946.

【6】

BUNSHAH R F. Handbook of deposition technologies for films and coating: science, technology, and applications[M].New Jersey: Noyes Publications, 1994: 237-326.

【7】

盛永莉.正交试验设计及其应用[J].济南大学学报, 1997(3): 69-73.

【8】

HAGEMEYER A, JANDELEIT B, LIU Y M, et al. Applications of combinatorial methods in catalysis[J].Applied Catalysis A-General, 2001, 221(1/2): 23-43.

【9】

CHISHOLM B, POTYRAILO R, SHAFFER R, et al. Development of a high throughput screening method for abrasion resistance: correlation with conventional methods and the effects of abrasion mechanism [J].Progress in Organic Coatings, 2003, 47(2): 112-119.

【10】

KIRSTEN G, MAIER W F. Strategies for the discovery of new catalysts with combinatorial chemistry[J].Applied Surface Science, 2004, 223(1/3): 87-101.

标准分享网无损检测论文频道,免费下载【铝锌二元合金镀膜盐液腐蚀表征参数的正交优化设计及耐蚀成分优选】,仅供学习使用,不得商用,如需商用请购买正版铝锌二元合金镀膜盐液腐蚀表征参数的正交优化设计及耐蚀成分优选。谢谢合作

【关键词】 铝锌合金镀膜 组合材料方法 正交优化设计 耐腐蚀性能  霍伟亮 唐馥涵 刘庆峰 刘茜

猜下面文档对你有所帮助
机械工程材料论文排行