返回顶部
位置:标准分享网>机械工程材料论文>2E12铝合金热变形过程中的动态软化机制
2E12铝合金热变形过程中的动态软化机制
  • 资料大小:

  • 更新时间:

    2010-09-22

  • 授权方式:

    共享学习

  • 资料格式:

    PDF

  • 软件等级:

  • 官方主页:

    http://www.ndt88.com

资料简介

用Gleeble-1500型热模拟试验机对2E12铝合金进行了等温热压缩试验, 对热变形后的显微组织进行了透射电镜和场发射扫描电镜观察, 研究了2E12合金在不同条件下热变形过程中的动态软化机制及其显微组织演化规律。结果表明: 在变形温度不高于400 ℃时, 合金的主要动态软化机制为动态回复; 而当变形温度不低于450 ℃时, 其主要的动态软化机制为连续动态再结晶, 亚晶扭转合并为动态再结晶的主要形核机制, 且沿原始晶界优先形核。

所属栏目

国家重点基础研究发展规划项目(2005CB623705); 国家自然科学基金资助项目(50871123)

收稿日期

2010/9/222011/6/2

作者单位

黄裕金:中南大学材料科学与工程学院, 长沙 410083
陈志国:中南大学材料科学与工程学院, 长沙 410083

备注

黄裕金(1985-),男, 江西上饶人, 硕士研究生。

引用该论文:

HUANG Yu-jin,CHEN Zhi-guo.Dynamic Softening Mechanism of 2E12 Aluminum Alloy during Hot Deformation[J].Materials for mechancial engineering,2011,35(10):22~27
黄裕金,陈志国.2E12铝合金热变形过程中的动态软化机制[J].机械工程材料,2011,35(10):22~27


参考文献

【1】

GOURDET S, MONTHEILLET F. An experimental study of the recrystallization mechanism during hot deformation of aluminum[J].Materials Science and Engineering A,2000,283:274-288.

【2】

MCQUEEN H J. Development of dynamic recrystallization theory[J].Materials Science and Engineering A,2004,387/389:203-208.

【3】

KASSNER M E, BARRABES S R. New development of geometric dynamic recrystallization[J].Materials Science and Engineering A,2005,410/411:152-155.

【4】

MCQUEEN H J, POSCHMANN I. Subgrain development in hot working of Al and Al-5Mg[J].Materials Science and Engineering A,1997,234/236:830-833.

【5】

BAXTER G J, FURU T, ZHU Q,et al. The influence of transient strain-rate deformation conditions on the deformed microstructure of aluminum alloy Al-1%Mg [J].Acta Mater,1999,47(8):2367-2376.

【6】

FURU T, SHERCLIFF H R, BAXTER G J,et al. The influence of transient deformation conditions on recrystallization during thermomechanical processing of Al-1%Mg alloy[J].Acta Materialia,1999,47(8):2377-2389.

【7】

BLUM W, ZHU Q, MERKEL R,et al. Geometric dynamic recrystallization in hot torsion of Al-5Mg-0.6Mn (AA5083)[J].Materials Science and Engineering A,1996,205:23-30.

【8】

GOURDET S, MONTHEILLET F. A model of continuous dynamic recrystallization[J].Acta Materialia,2003,51:2685-2699.

【9】

SAKAI T, MIURA H, GOLOBRODKO A,et al. Continuous dynamic recrystallization during the transient severe deformation of aluminum alloy 7475[J].Acta Materialia,2009,57(1):153-163.

【10】

KAIBYSHEV R, SITDIKOV O, GOLOBORODKO A,et al. Grain refinement in as-cast 7475 aluminum alloy under hot deformation[J].Materials Science and Engineering A,2003,344:348-356.

【11】

ZHOU Jian, ZHANG Ting-jie, ZHANG Xiao-ming,et al. The influence of strain rate and solution treatment on dyna-mic recrystallization for 7075 aluminum alloy[J].Rare Metal Materials and Engineering,2004,33(6):580-584.

【12】

HU H E, ZHEN L, ZHANG B Y,et al. Microstructure characterization of 7050 aluminum alloy during dynamic recrystallization and dynamic recovery[J].Materials Characterization,2008,59:1185-1189.

【13】

万菊林,孙新军,顾家琳,等.Al-Cu-Mg-Zn-Cr合金热扭转变形中连续动态再结晶机理[J].金属学报,1999,35(10):1031-1035.

【14】

WOJCIECHOWSKI S. New trends in the development of mechanical engineering materials[J].Journal of Materials Processing Technology,2000,106:230-235.

【15】

SRIVATSAN T S, KOLAR D, MAGNUSEN P. The cyclic fatigue and final fracture behavior of aluminum alloy 2524[J].Materials and Design,2002,23:129-139.

【16】

陈文.先进铝合金在A380上的应用[J].航空维修与工程,2005(2):41-42.

【17】

WARNER T. Recently-developed aluminum solutions for aerospace applications[J].Materials Science Forum,2006,519/521:1271-1278.

【18】

SRIVATSAN T S, KOLAR D, MAGNUSEN P. Influence of temperature on cyclic stress response, strain resistance, and fracture behavior of aluminum alloy 2524[J].Materials Science and Engineering A,2001,314:118-130.

【19】

杨胜,易丹青,姚素娟,等.温度对2E12铝合金疲劳性能与断裂机制的影响[J].航空材料学报,2007,27(6):9-13.

【20】

杨胜,易丹青,姚素娟,等.腐蚀环境下2E12航空铝合金疲劳裂纹扩展行为研究[J].材料工程,2007(12):26-34.

【21】

杨胜,易丹青,姚素娟,等.热处理对2E12铝合金耐腐蚀性及力学性能的影响[J].金属热处理,2007,32(9):9-13.

【22】

孙晓旭,郑子樵,陈圆圆,等.含Zr Al-Cu-Mg合金的微观组织与疲劳行为[J].中国有色金属学报,2009,19(1):50-55.

【23】

李海,郑子樵,魏修宇,等.时效析出对2E12铝合金疲劳断裂行为的影响[J].中国有色金属学报,2008,18(4):589-594.

【24】

李海,王芝秀,魏修宇,等.固溶处理时间对2E12铝合金组织和疲劳性能的影响[J].航空学报,2009,30(1):148-152.

【25】

李俊鹏, 沈健, 闫晓东, 等.温度对7075铝合金热变形显微组织演化的影响[J].中国有色金属学报,2008,18(11):1951-1957.

【26】

GALIYEV A, KAIBYSHEV R, GOTTSTEIN G. Correlation of plastic deformation and dynamic recystallization in magnesium alloy ZK60[J].Acta Materialia,2001,49:1199-1207.

【27】

HUMPHERYS H J, HATHERLY M. Recrystallization and related annealing phenomena[M].Oxford: Elsevier Press,2004.

标准分享网无损检测论文频道,免费下载【2E12铝合金热变形过程中的动态软化机制】,仅供学习使用,不得商用,如需商用请购买正版2E12铝合金热变形过程中的动态软化机制。谢谢合作

【关键词】 2E12铝合金 显微组织 动态软化机制 热变形  黄裕金 陈志国

猜下面文档对你有所帮助
机械工程材料论文排行