采用聚乙烯醇水溶胶制备铝粉浆料, 然后与碳纳米管的分散液共混, 借助聚乙烯醇水溶胶辅助制备碳纳米管/铝复合粉体;通过黏度计、红外-拉曼光谱仪测定聚乙烯醇的黏度和红外光谱, 利用扫描电镜观察复合粉体的形貌和碳纳米管的分散状态。结果表明: 该工艺制备的碳纳米管/铝复合粉体中碳纳米管均匀分散在铝粉的表面,随着聚乙烯醇水溶胶质量分数从1%增加至3%, 铝粉表面碳纳米管的吸附量(体积分数)可从0.04%增加至0.2%。
所属栏目
国家自然科学基金资助项目(50890174; 51071100); 国际科技合作项目(2010DFA52550)
收稿日期
2010/9/202011/5/27
作者单位
许勇:上海交通大学金属基复合材料国家重点实验室,上海 200240
范根莲:上海交通大学金属基复合材料国家重点实验室,上海 200240
李志强:上海交通大学金属基复合材料国家重点实验室,上海 200240
江林:上海交通大学金属基复合材料国家重点实验室,上海 200240
张荻:上海交通大学金属基复合材料国家重点实验室,上海 200240
陈志新:卧龙岗大学工学部,澳大利亚新南威尔士州 2522
备注
许勇(1985-), 男, 河北赵县人, 硕士研究生。
引用该论文:
XU Yong,FAN Gen-lian,LI Zhi-qiang,JIANG Lin,ZHANG Di,CHEN Zhi-xin.Preparation of Carbon Nanotube/Al Composite Powders Assisted by PVA Gel and Their Characterization[J].Materials for mechancial engineering,2011,35(10):58～61
许勇,范根莲,李志强,江林,张荻,陈志新.聚乙烯醇水溶胶辅助制备碳纳米管/铝复合粉体及表征[J].机械工程材料,2011,35(10):58～61
参考文献
【1】
TREACY M M J, EBBESEN T W, GIBSON J M. Nanotubes as nanoprobes in scanning probe microscopy[J].Nature,1996,381:678-680.
【2】
KRISHNAN A, DUJARDIN E, EBBESEN T W,et al. Treacy young′s modulus of single-walled nanotubes[J].Physical Review B,1998,58(20):14013-14019.
【3】
WONG E W, SHEEHAN P E, LIEBER C M. Nanobeam mechanics: elasticity, strength, and toughness of nanorods and nanotubes[J].Science,1997,277:1971-1974.
【4】
YU M F, FILE B S, AREPALLI S,et al. Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties[J].Physical Review Letter,2000,84(24):5552-5555.
【5】
YU M F, LAURIE O, DYER M J,et al. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load[J].Science,2000,287:637-640.BERBER S, KWON Y K, TOMANEK D. Unusually high thermal conductivity of carbon nanotubes[J].Physical Review Letter,2000,84(20):4613-4616.
【6】
KIM P, SHI L, MAJUMDAR A,et al. Thermal transport measurements of individual multiwalled nanotubes[J].Physical Review Letter,2001,87(21):215502-215505.
【7】
KUZAMAKI T, MIYAZAWA K, ICHINOSE H, et al. Processing of carbon nanotube reinforced aluminum composite[J].Journal Materials Research,1998,13:2245-2449.
【8】
WANGER H D, LOURIE O, FELDMAN Y,et al. Transmission electron microscopy observations of fracture of single-wall carbon nanotubes under axial tension[J].Apply Physical Letter,1998,72:188-190.
【9】
ESAWI A, MORSI K. Dispersion of carbon nanotubes (CNTs) in aluminum powder[J].Composites Part A: Applied Science and Manufacturing,2007,38:646-650.
【10】
KWON H, ESTILI M, TAKAGI K,et al. Combination of hot extrusion and spark plasma sintering for producing carbon nanotube reinforced aluminum matrix composites[J].Carbon,2009,47(3):570-577.
【11】
BAKSHI S R, SINGH V, SEAL S,et al. Aluminum composite reinforced with multiwalled carbon nanotubes from plasma spraying of spray dried powders[J].Surface Coatings Technology,2009,203:1544-1554.
【12】
YANG Y, SUGA T, KAWASAKI M,et al. Effect of poly(vinyl alcohol) adsorption on binder segregation during drying[J].Journal of the American Ceramic Society,1996,79(2):435-440.
