返回顶部
位置:标准分享网>机械工程材料论文>退火对热轧X80管线钢织构和断口分离的影响
退火对热轧X80管线钢织构和断口分离的影响
  • 资料大小:

  • 更新时间:

    2009-08-10

  • 授权方式:

    共享学习

  • 资料格式:

    PDF

  • 软件等级:

  • 官方主页:

    http://www.ndt88.com

资料简介

对“西气东输”二线工程使用的X80管线钢进行拉伸、冲击、落锤撕裂等试验时,在试样断口上产生了明显的断口分离现象;采用背散射电子衍射(EBSD)试验方法,通过分析该管线钢退火前后的显微组织和织构形态的变化,研究了断口分离产生的原因.结果表明:热轧态的X80钢板中存在明显的{111}〈110〉和{110}〈001〉织构;在700℃退火2 h后,这两类织构组分有所减少,并且出现了新的{110}〈111〉织构;退火后,该管线钢材料的平均晶粒尺寸由原来的2.27 μm变为2.84 μm,断口分离程度消除或减轻.

所属栏目

试验研究

收稿日期

2009/8/102010/4/13

作者单位

李洋:中国石油天然气集团公司管材研究所, 西安 710065
林冠发:中国石油天然气集团公司管材研究所, 西安 710065
吉玲康:中国石油天然气集团公司管材研究所, 西安 710065
霍春勇:中国石油天然气集团公司管材研究所, 西安 710065
冯耀荣:中国石油天然气集团公司管材研究所, 西安 710065

备注

李洋(1980-),男,陕西山阳人,工程师,硕士.

引用该论文:

LI Yang,LIN Guan-fa,JI Ling-kang,HUO Chun-yong,FENG Yao-rong.Effect of Annealing on Texture and Fracture Separation of Rolled X80 Pipeline Steel[J].Materials for mechancial engineering,2010,34(10):14~18
李洋,林冠发,吉玲康,霍春勇,冯耀荣.退火对热轧X80管线钢织构和断口分离的影响[J].机械工程材料,2010,34(10):14~18


参考文献

【1】

TAKEUCHI I,OKAGUCHI S,MAKINO H.Development and evaluation of high strength line pipe for high pressure gas transmission pipeline[C]//Proceedings of International Seminar on Application of High Strength Line Pipe and Integrity Assessment of Pipeline.Xi′an:[s.n.],2006.

【2】

WIKOWSKI G M,WANG Y Y,RUDLAND D.Recent effect on characterizing propagation ductile fracture resistance of line pipe steels[J].Denys R Pipeline Technology,2000,1:359-386.

【3】

KAZUTOSHI K,FUKDA M,SUGISAWA S.Separations occur in controlled rolled hot strips[J].Transaction ISIJ,1979,19(1):324-331.

【4】

GUO W L,DONG H R,LU M X,et al.The coupled effects of thickness and delamination on cracking resistance of X70 pipeline steel[J].Inter J Pressure Vessels and Piping,2002,79(6):403-412.

【5】

熊庆人,冯耀荣,霍春勇,等.X70管线钢的断口分离现象分析研究[J].机械工程材料,2005,29(12):21-25.

【6】

NAKAMURA T,PARKS D M.Three dimensional stress crack front fields in a thin Ductile Plate[J].Journal of the Mechanics and Physics of Solids,1990,38(6):787-812.

【7】

GORDON R,GRAY M.Preliminary dynamic fracture analysis[C]//Proceedings of International Seminar on Fracture Control Technology for X80 High Pressure Gas Transmission Pipeline,Xi′an:[s.n.],2007.

【8】

DEMOFONTI G,MANNUCCI G.Arrest assessment of X100 TMCP linepipe used for high pressure gas pipipeline[C]//Proceedings of International Seminar on Fracture Control Techno-logy for X80 High Pressure Gas Transmission Pipeline.Xi′an:[s.n.],2007.

【9】

FELBER S,SCHNEESEISS G,VARGA T.Crack-arrest in a pipeline Steel[C]//Proceedings of the 2nd International Pipeline Technology Conference.Ostend:[s.n.],1995.

【10】

杨政,任斌,赵新伟,等.铁素体管线钢的分层裂纹及其对断裂的影响[J].材料研究学报,2007,21(3):311-318.

【11】

王清江,单以银,滕华元,等.控制轧制钢中的断口分离现象[J].兵器材料科学与工程,1992,15(9):50-54.

标准分享网无损检测论文频道,免费下载【退火对热轧X80管线钢织构和断口分离的影响】,仅供学习使用,不得商用,如需商用请购买正版退火对热轧X80管线钢织构和断口分离的影响。谢谢合作

【关键词】 X80管线钢 断口分离 织构 退火  李洋 林冠发 吉玲康 霍春勇 冯耀荣

猜下面文档对你有所帮助
机械工程材料论文排行