返回顶部
位置:标准分享网>机械工程材料论文>La2O3对等离子喷涂Al2O3-13%TiO2涂层显微结构与性能的影响
La2O3对等离子喷涂Al2O3-13%TiO2涂层显微结构与性能的影响
  • 资料大小:

  • 更新时间:

    2010-12-03

  • 授权方式:

    共享学习

  • 资料格式:

    PDF

  • 软件等级:

  • 官方主页:

    http://www.ndt88.com

资料简介

利用大气等离子喷涂工艺制备了Al2O3-13%TiO2(质量分数, 简称AT13)及添加不同含量La2O3 的陶瓷涂层, 通过X射线衍射仪和扫描电镜对涂层的显微结构进行了分析, 采用正态和Weibull分布统计分析方法研究了涂层的显微硬度分布, 并用块-环磨损试验研究了涂层的干滑动摩擦磨损行为。结果表明: La2O3改善了AT13涂层层片之间的结合, 且不会使涂层的主相发生变化; 添加La2O3对AT13涂层的显微硬度没有明显影响, 但使硬度分布的分散性降低, 涂层的耐磨性能得到明显提高, 尤以含质量分数6%La2O3的最佳, 磨损机制为脆性剥落磨损和粘着磨损。

所属栏目

收稿日期

2010/12/32011/8/27

作者单位

曾伶:福建农林大学机电工程学院, 福州 350002
陈丽梅:福州大学材料科学与工程学院, 福州 350108
李强:福州大学材料科学与工程学院, 福州 350108

备注

曾伶(1970-), 女, 福建福州人, 讲师, 硕士。

引用该论文:

ZENG Ling,CHEN Li-mei,LI Qiang.Effect of La2O3 on Microstructure and Properties of Al2O3-13%TiO2 Coating Prepared by Plasma Spraying[J].Materials for mechancial engineering,2011,35(12):33~37
曾伶,陈丽梅,李强.La2O3对等离子喷涂Al2O3-13%TiO2涂层显微结构与性能的影响[J].机械工程材料,2011,35(12):33~37


参考文献

【1】

徐滨士,刘世参.中国材料工程大典: 第16卷-材料表面工程(上)[M].北京:化学工业出版社,2006.

【2】

YILMAZ R, KURT A O, DEMIR A,et al.Effects of TiO2 on the mechanical properties of the Al2O3-TiO2 plasma sprayed coating[J]. Journal of the European Ceramic Society,2007,27(2/3):1319-1323.

【3】

孙永兴, 王引真, 何艳玲.稀土氧化物添加剂对Al2O3等离子喷涂层的影响[J]. 材料保护,2001,34(6):8-9.

【4】

LIU Y, GAO Y F, TAO S Y,et al. Microstructure of plasma sprayed La2O3-modified YSZ coatings[J]. Journal of Thermal Spray Technology,2008,17(5/6):603-607.

【5】

ZHANG Z Y, LU X C, LUO J B,et al.Tribological properties of rare earth oxide added Cr3C2-NiCr coatings[J]. Applied Surface Science,2007,253:4377-4385.

【6】

TIAN W, WANG Y, YANG Y,et al.Toughening and strengthening mechanism of plasma sprayed nanostructured Al2O3-13wt.%TiO2 coatings[J].Surface and Coatings Technology,2009,204:642-649.

【7】

ZHANG Z Y, LU X C, LUO J B.Tribological properties of La2O3 and CeO2 doped CoCrW coatings deposited by supersonic plasma spraying[J]. Chinese Science Bulletin,2007,52(3):3292-3298.

【8】

TIAN W, WANG Y, YANG Y,et al.Fretting wear behavior of conventional and nanostructured Al2O3-13wt%TiO2 coatings fabricated by plasma spray[J]. Wear,2008,265:1700-1707.

【9】

ZHANG Z Y, WANG Z P, LIANG B N.Microstructure and dry-sliding wear behavior of thermal sprayed and fused Ni-based coatings with the addition of La2O3[J]. Tribology Letters,2010,37:141-148.

【10】

GOBERMAN D, SOHN Y H, SHAW L,et al.Microstructure development of Al2O3-13wt.%TiO2 plasma sprayed coatings derived from nanocrystalline powders[J]. Acta Materialia,2002,50(5):1141-1152.

【11】

林新华. 等离子喷涂纳米结构氧化铝-3wt.%氧化钛涂层的制备及表征[D]. 上海:中国科学院上海硅酸盐研究所, 2003.

【12】

THOMPSON A M, SONI K K, CHAN H M,et al.Dopant distribution in rare earth doped alumina[J]. Journal of the American Ceramic Society,1997,80(2):373-376.

【13】

马臣,李慕勤.CeO2对等离子喷涂Al2O3涂层抗热震性的影响[J].中国稀土学报,1998,16(2):143-148.

标准分享网无损检测论文频道,免费下载【La2O3对等离子喷涂Al2O3-13%TiO2涂层显微结构与性能的影响】,仅供学习使用,不得商用,如需商用请购买正版La2O3对等离子喷涂Al2O3-13%TiO2涂层显微结构与性能的影响。谢谢合作

【关键词】 等离子喷涂 Al2O3-13%TiO2涂层 La2O3 显微结构 性能  曾伶 陈丽梅 李强

猜下面文档对你有所帮助
机械工程材料论文排行