为保证构件的安全使用，需要建立可靠的、定量的材料无损评价和表征技术。利用超声波传播的非线性特性，可以解决一些线性超声检测技术难以解决的问题。研究发现，非线性超声检测方法在闭合裂纹检测、粘接结构粘接强度评价、力学性能退化评估等方面显示出了线性超声检测无法比拟的优点。
所属栏目
综述
收稿日期
2012/2/8
作者单位
陆铭慧:南昌航空大学 无损检测技术教育部重点实验室，南昌330063
徐肖霞:南昌航空大学 无损检测技术教育部重点实验室，南昌330063
备注
陆铭慧(1963-)，女，博士研究生，副教授，主要从事超声检测研究。
引用该论文:
LU Ming-Hui,XU Xiao-Xia.Review of Nonlinear Ultrasonic Testing Method[J].Nondestructive Testing,2012,34(7):61～66
陆铭慧,徐肖霞.非线性超声检测方法及应用[J].无损检测,2012,34(7):61～66
被引情况:
【1】
陈军,任俊, "线性和非线性超声技术检测不同裂缝宽度下的砂浆试块损伤",无损检测
37, 22-25(2015)
【2】
陈军,黄灿,王豪, "超声有限幅度法检测混凝土孔洞缺陷",无损检测
38, 26-29(2016)
参考文献
【1】
Tribikram Kundu. Ultrasonic Nondestructive Evaluation［M］. United States of America: Crcpress,2004:363-436.
【2】
钱祖文.非线性声学［M］.北京：科学出版社,2009.
【3】
John H Cantrell. Crystalline structure and symmetry dependence of acoustic nonlinear parameters［J］. Journal of Applied Physics,1994(76):3372-3380.
【4】
Tae Hun Lee, Kyung Young Jhang. Experimental investigation of nonlinear acoustic effect at crack［J］. NDT&E International,2009(42):757-764.
【5】
Nohyu Kim. Nonlinear behavior of ultrasonic wave at crack［J］. Review of QNDE,2010(29):313-318.
【6】
施克仁.无损检测新技术［M］.北京：清华大学出版社,2007:162-204.
【7】
Koichiro Kawashima. Evaluation of minute cracks generated by spallation with nonlinear ultrasonic measurement［J］. Review of QNDE,2001(20):1283-1289.
【8】
Koichiro Kawashima, Kouichi Sekino, Kazuyoshi Ichigo. Higher harmonic imaging of tight cracks in glass plates and weld interface with mode-converted transverse waves［J］. ISNA,2008(18):537-540.
【9】
敦怡，师小红，徐章遂.非线性超声在金属基复合材料结构界面粘接强度评价中的应用［J］.中国机械工程,2008,19(19):2351-2354.
【10】
Wegner A. Assessment of the adhesion quality of fusion-welded silicon wafers with nonlinear ultrasound［J］. Ultrasonics,2000(38):316-321.
【11】
Hirsekorn S. Quality assessment of bond interfaces by nonlinear ultrasonic transmission［J］. Review of QNDE,2000(19):1367-1374.
【12】
Ryuzo Yamada, Koichiro Kawashima, Morimasa Murase. Application of nonlinear ultrasonic measurement for quality assurance of diffusion bonds of Gamma Titanium Alumiun alloy and steel［J］. Rasearch in Nondestructive Evaluation,2006(17):223-239.
【13】
Koichiro Kawashima. Nonlinear ultrasonic imaging of imperfectly bonded interfaces［J］. Ultrasonics,2006(44):1329-1333.
【14】
John H Cantrell, William T Yost. Nonlinear ultrasonic characterization of fatigue microstructures［J］. International Journal of Fatigue,2001(23)487-490.
【15】
John H Cantrell. Nondestructive evaluation of metal fatigue using nonlinear acoustic［J］. Review of QNDE,2009(28):19-32.
【16】
John H Cantrell. Acoustic nonlinearity in polycrystalline Nickel from fatigue-generated microstructures［J］. Review of QNDE,2005(24):337-344.
【17】
John H Cantrell. Dependence of microelastic-plastic nonlinearity of martensitic stainless steel on fatigue damage accumulation［J］. Journal of Applied Physics,2006(100):1-4.
【18】
邓明晰，裴俊峰.无损评价固体板材疲劳损伤的非线性超声兰姆波方法［J］.声学学报,2008(33):360-369.
【19】
Peter B Nagy. Fatigue damage assessment by nonlinear ultrasonic materials characterization［J］. Ultrasonic,1998(36):375-381.
【20】
Michele Meo, Umberto Polimeno, Giuseppe Zumpano. Detecting damage in composite material using nonlinear elastic wave spectroscopy methods［J］. Appl Compos Mater,2008(15):115-126.
【21】
Aymerich F, Staszewski W J. Impact damage detection in composite laminates using nonlinear acoustic［J］. Composites,2010(A41):1084-1092.
【22】
Kyung-Young Jhang, Kyung-Cho Kim. Evaluation of material degradation using nonlinear acoustic effect［J］. Ultrasonic,1999(37):39-44.
【23】
Viswanath A. Nondestructive assessment of tensile properties of cold worked AISI type 304 stainless steel using nonlinear ultrasonic technique［J］. Journal of Materials Processing Technology,2011(211):538-544.
【24】
Kim C S, Ik-Keun Park, Kyung-Young Jhang. Nonlinear ultrasonic characterization of thermal degradation in ferritic 2.25 Cr-1 Mo steel［J］. NDT&E International,2009(42):204-209.
【25】
Hyunjo Jeong A. Nondestructive method for estimation of the fracture toughness of CrMoV rotor steels based on ultrasonic nonlinearity［J］. Ultrasonic,2003(41):543-549.
【26】
Koichiro Kawashima. Detection and imaging of nonmetallic inclusions in continuously cast steel plates by higher harmaonics［J］. Japanese Journal of Applied Physics,2010(49):07HC-1-4.
【27】
Ayumu Osumi. A study of detecting internal defect in solid material using nonlinear aerial convergence ultrasonic waves［J］. Proceedings of Symposium on Ultrasonic Electronics,2011(32):511-512.
【28】
Shiro Biwa. Quantitative evaluation of harmonic generation at contacting interface［J］. ISNA,2008(18):505-508.
【29】
Shiro Biwa. Pressure-dependent stiffness and nonlinear ultrasonic response of contacting surface［J］. Journal of Solid Mechanics and Materials Engineering,2009(3):10-21.
【30】
Toshihiro Ohtani. Nonlinear acoustic evaluation of creep damage in boiler heat exchange tubes［J］. Japan Journal of Applied Physics,2007(46):4577-4582.
【31】
Minghe Liu. Expermantal study of nonlinear rayleigh wave propagation in shot-peened aluminum plates-feasibility of measuring residual stress［J］. NDT&E International,2011(44):67-74.
【32】
常俊杰.超声波的非线性对涂层材料的质量评价［J］.大连海事大学学报,2008(34):7-10.
